Nylon conveyor belt

Nylon conveyor belt is widely used in mining, coal yard, chemical industry, metallurgy, construction, port and other departments. Nylon conveyor belt is suitable for conveying non-corrosive bulk, granular, powder materials, such as coal, coke, sand, cement and other bulk materials (materials) or component articles, conveying various bulk, granular, powder and other loose materials with accumulation density of 6.5~2.5t/m3, can also be used for the transportation of adult articles. Compared with ordinary cotton cloth core conveyor belt, nylon conveyor belt has the advantages of high strength, good elasticity, impact resistance, light weight and good groove performance. It can effectively reduce the transmission cost and realize high speed, large span and long distance transmission.

Nylon core conveyor belt has the characteristics of thin body, high strength, impact resistance, good performance, high interlayer bonding strength, excellent flexure and long service life, suitable for medium and long distance, high load and high speed conditions of conveying materials. Nylon conveyor belt not only has these advantages, the most important thing is that it is fast and convenient, greatly improve the work efficiency and work integrity degree.

According to the different properties of covering glue, it is divided into cold resistance, acid resistance, alkali resistance, oil resistance, wear resistance and so on.

According to the different uses can be divided into lifting belt, power belt, conveyor belt.

According to the different structure can be divided into ordinary laminate type, plus transverse enhancement layer of impact resistance, tear prevention type.

(1) Material with core: NN 100, NN 150, NN 200, NN 300, NN 400, NN 500

(2) Bandwidth: 1,00 mm-3,000 mm

(3) cloth layer: 1-10 layer

(4) Coverage glue: working face: 1.5-8mm non-working face: 0mm-4.5mm

Interlayer bonding strength:

Indicator project	Between the cloth layer	Between the cover layer and the belt core
Overlay thickness of 0.8-1.5mm	Overlay thickness is> 1.5mm	–
Mean value of all samples, N/mm, not less than	4.5	3.2	3.5
Minimum peak of all samples, N/mm is not less than	3.9	2.4	2.9

Note: The highest peak value of all samples shall not exceed 20 N/mm